Why Is My Laminator Not Feeding?

Do you want to make your pictures, documents, materials, and posters look better and last longer? Then it would be best if you tried lamination. However, lamination can be challenging. Sometimes, the film does not go into the laminator correctly, and you get problems like wrinkles, jams, bubbles, or incomplete lamination. This blog post will explain why and how to fix this.

Reason: Incompatible Film Size or Type

The film with different thicknesses, widths, core sizes, or types than your laminator may not fit or feed properly. This can lead to bad or no lamination.

Solution: Verify the Film Compatibility

Don’t use any film before you check if it works with your laminator. The film package, the laminator manual, or the website of the laminator maker will tell you this. If you still have doubts, you can always ask the people who sold you the film or the laminator.

Reason: Improper Film Loading or Alignment

Loading or aligning the film wrongly may get stuck, curl, or misfeed in your laminator. This can affect the quality and performance of your lamination.

Solution: Follow the Film Loading and Alignment Instructions

To load and align the film on your laminator, do what the instructions say. You can see them on the laminator manual, the film package, or the website of the laminator maker. The film should go right side up, face the right way, and be in the middle of the rollers. Also, the film should be unwound and threaded the right way, with enough slack or tension on the film.

Reason: Dirty or Damaged Rollers

The film goes through your laminator’s rollers and sticks to your items. But if the rollers are dirty or broken, they can mess up your lamination. They can make it rough, uneven, or not stick at all. They can also make the film get stuck, slide, or rip.

Solution: Clean and Maintain the Rollers

Clean and maintain your laminator’s rollers regularly. The manufacturer’s website or the laminator manual has instructions on this. To lubricate and clean the rollers, use a silicone spray, a soft cloth, and a mild cleanser. Avoid strong or abrasive cleaners as they may damage the rollers. Also, check for any signs of wear or damage on the rollers and replace them as needed.

Reason: Laminator Either Defective or Failed

Occasionally, the laminator malfunctions and may not be able to work as it should. This could be a short, loose, corrupt connection, a power surge, or a mechanical or electrical connection. The air conditioner might not come on, keep the room warm, or feed the projector incorrectly. This may result in some problems with lamination and may even cause your item not to be laminated.

Solution: Procedure for Troubleshooting and Repairing the Laminator

You must carry on with the problem if you spot any sign thereof. You can see this on the laminator manual or the maker’s website. Please check the adaptor, the socket, the fuse, the board, the motor, and the heater board. Check for errors like error codes, warning lights, odd sound characteristics, and odor from your laminator. When you do not know how to set up a laminator or it malfunctions, you can always get assistance from your manufacturer or service provider.

If you are looking for a good, low-cost laminating equipment supplier, look no further than Filmsource Inc., a trustworthy laminating equipment supplier since 1996. Contact us today to get more details on what we offer.