fb
Member Login
 
Magnetic Back Pouch - 3 Mil gloss laminate 11" x 14" 10 Pack
Magnetic Back Pouch - 3 Mil gloss laminate 11" x 14" 10 PackOur new Magnet Back Pouch is a unique way for you to make your very own personal custom laminated signs and picture magnets. Gloss laminate over a quality magnet will create a custom sign or picture in a 11" X 14" size that will stick to any metal surface. Just run your pouch with the magnet back thru a pouch laminator and you can fill your office or home with pictures and signs to enjoy throughout the day.

  • Finish: gloss
  • Size: 11" x 14"
  • Considered a business card size
  • Thickness film: 3 mil low melt
  • Thickness magnet: 12 mil back
  • Qty: 10 per package

    How To Use Magnetic Laminating Pouches:

  • Preheat your pouch laminator to high, somewhere between 230 and 250 degrees f (110/120 degrees c). Set the speed to slow/medium. Because there are so many different laminators in the marketplace, you may need to test several different settings to determine what offers the best results for you.
  • Run the sealed edge of the Magnet Pouch first into the rollers of your pouch laminator.
  • If your laminator requires it, be sure to use a pouch carrier.
  • To insure flat magnets, remove the magnet from the carrier immediately after it exits the pouch laminator. Place the magnet on a flat surface for cooling.
  • When printing standard magnets, card stock (8pt to 14pt) is recommended. Thicker stock may require multiple passes through the laminator.

  • Magnetic Back Pouch - 3 Mil gloss laminate 2" H x 3 5/8 " L 20 Pack
    Magnetic Back Pouch - 3 Mil gloss laminate 2" H x 3 5/8 " L 20 PackOur new Magnet Back Pouch is a unique way for you to make your very own personal custom laminated signs and picture magnets. Gloss laminate over a quality magnet will create a custom sign or picture in a 2" X 3" size that will stick to any metal surface. Just run your pouch with the magnet back thru a pouch laminator and you can fill your office or home with pictures and signs to enjoy throughout the day.

  • Finish: gloss
  • Size: 2" H x 3" 5/8 L
  • Considered a business card size
  • Thickness film: 3 mil low melt
  • Thickness magnet: 12 mil back
  • Qty: 20 per package

    How To Use Magnetic Laminating Pouches:

  • Preheat your pouch laminator to high, somewhere between 230 and 250 degrees f (110/120 degrees c). Set the speed to slow/medium. Because there are so many different laminators in the marketplace, you may need to test several different settings to determine what offers the best results for you.
  • Run the sealed edge of the Magnet Pouch first into the rollers of your pouch laminator.
  • If your laminator requires it, be sure to use a pouch carrier.
  • To insure flat magnets, remove the magnet from the carrier immediately after it exits the pouch laminator. Place the magnet on a flat surface for cooling.
  • When printing standard magnets, card stock (8pt to 14pt) is recommended. Thicker stock may require multiple passes through the laminator.

  • Magnetic Back Pouch - 3 Mil gloss laminate 4" x 6" 20 Pack
    Magnetic Back Pouch - 3 Mil gloss laminate 4" x 6" 20 PackThe Magnet Back Pouch requires 2 things to make professional quality magnets.

    1) Quality Heated Roller Pouch Laminator designed for running photographs 2) Printed Sheet or Photograph

    Whether you are a print shop owner who needs a 100 business card magnets, a photographer showing your quality work or a school teacher wanting to send home a child's drawing for an upcoming holiday, our Magnet Back Pouch gives you the ability to make quality magnets fast. Our Magnet Back Pouch is like a traditional laminating pouch in its construction. There is heat activated adhesive on the interior of the film & magnet. To make a magnet, simply insert your printed sheet or photo between the two layers of the pouch, place the pouch inside the provided carrier, feed this through a pouch laminator & you will have a professional quality magnet.

  • Finish: gloss
  • Size: 4" x 6"
  • Thickness film: 3 mil low melt
  • Thickness magnet: 12 mil
  • Qty: 20 per package

  • Magnetic Back Pouch - 3 Mil gloss laminate 8.5" x 11" 10 Pack
    Magnetic Back Pouch - 3 Mil gloss laminate 8.5" x 11" 10 PackOur new Magnet Pouch is a unique way for you to make your very own personal custom laminated signs and picture magnets. Gloss laminate over a quality magnet will create a custom sign or picture that will stick to any metal surface. Simply place your printed paper or a photograph between the layers of the Magnet Back Pouch. Insert the Magnet Back Pouch into the provided carrier & run it through a heated pouch laminator. Be sure to run the Magnet Back Pouches sealed edge as the leading edge into the machine.

  • Finish: gloss
  • Size: 8.5" x 11"
  • Thickness film: 3 mil low melt
  • Thickness magnet: 12 mil
  • Qty: 10 per package

    How To Use Magnetic Laminating Pouches:

  • Preheat your pouch laminator to high, somewhere between 230 degrees and 250 degrees f (110 degrees and 120 degrees c). Set the speed to slow/medium. Because there are so many different laminators in the marketplace, you may need to test several different settings to determine what offers the best results for you.
  • Run the sealed edge of the Magnet Pouch first into the rollers of your pouch laminator.
  • If your laminator requires it, be sure to use a pouch carrier.
  • To insure flat magnets, remove the magnet from the carrier immediately after it exits the pouch laminator. Place the magnet on a flat surface for cooling.
  • When printing standard magnets, card stock (8pt to 14pt) is recommended. Thicker stock may require multiple passes through the laminator

  • Magnetic Back Pouch - 3 Mil matte 8" x 10" 10 per pack
    Magnetic Back Pouch - 3 Mil matte 8" x 10" 10 per packCreate your own custom magnets quickly and easily with our new, exclusive magnet pouches! Simply insert your printed image into the pouch, then pass it through a photo pouch laminator to adhere. These magnet pouches make refrigerator magnets and car door magnets easy to create in a small workspace!

  • Run the sealed edge of the Magnet Pouch first into the rollers of your pouch laminator.
  • If your laminator requires it, be sure to use a pouch carrier.
  • To insure flat magnets, remove the magnet from the carrier immediately after it exits the pouch laminator. Place the magnet on a flat surface for cooling.
  • When printing standard magnets, card stock (8pt to 14pt) is recommended. A 6 roller laminator is recommended, but not always necessary. Test your pouch. Thicker stock may require multiple passes through the laminator.

  • Finish: matte
  • Size: 8" x 10"
  • Thickness film: 3 mil low melt
  • Thickness magnet: 12 mil
  • Qty: 10 per package

  • Magnetic Back Pouch - 3 Mil matte laminate 11" x 14" 10 Pack
    Magnetic Back Pouch - 3 Mil matte laminate 11" x 14" 10 PackOur new Magnet Back Pouch is a unique way for you to make your very own personal custom laminated signs and picture magnets. Matte laminate over a quality magnet will create a custom sign or picture in a 11" X 14" size that will stick to any metal surface. Just run your pouch with the magnet back thru a pouch laminator and you can fill your office or home with pictures and signs to enjoy throughout the day.

  • Finish: matte
  • Size: 11" x 14"
  • Considered a business card size
  • Thickness film: 3 mil low melt
  • Thickness magnet: 12 mil back
  • Qty: 10 per package

    How To Use Magnetic Laminating Pouches:

  • Preheat your pouch laminator to high, somewhere between 230 and 250 degrees f (110/120 degrees c). Set the speed to slow/medium. Because there are so many different laminators in the marketplace, you may need to test several different settings to determine what offers the best results for you.
  • Run the sealed edge of the Magnet Pouch first into the rollers of your pouch laminator.
  • If your laminator requires it, be sure to use a pouch carrier.
  • To insure flat magnets, remove the magnet from the carrier immediately after it exits the pouch laminator. Place the magnet on a flat surface for cooling.
  • When printing standard magnets, card stock (8pt to 14pt) is recommended. Thicker stock may require multiple passes through the laminator.
  • 6 roll laminator recommended.

  • Magnetic Back Pouch - 3 Mil matte laminate 2" x 3" 20 Pack
    Magnetic Back Pouch - 3 Mil matte laminate 2" x 3" 20 PackOur new Magnet Back Pouch is a unique way for you to make your very own personal custom laminated signs and picture magnets. Matte laminate over a quality magnet will create a custom sign or picture in a 2" X 3" size that will stick to any metal surface. Just run your pouch with the magnet back thru a pouch laminator and you can fill your office or home with pictures and signs to enjoy throughout the day.

  • Finish: matte
  • Size: 2" x 3"
  • Business card size
  • Thickness film: 3 mil low melt
  • Thickness magnet: 12 mil back
  • Qty: 20 per package

    How To Use Magnetic Laminating Pouches:

  • Preheat your pouch laminator to high, somewhere between 230 and 250 degrees f (110/120 degrees c). Set the speed to slow/medium. Because there are so many different laminators in the marketplace, you may need to test several different settings to determine what offers the best results for you.
  • Run the sealed edge of the Magnet Pouch first into the rollers of your pouch laminator.
  • If your laminator requires it, be sure to use a pouch carrier.
  • To insure flat magnets, remove the magnet from the carrier immediately after it exits the pouch laminator. Place the magnet on a flat surface for cooling.
  • When printing standard magnets, card stock (8pt to 14pt) is recommended. Thicker stock may require multiple passes through the laminator.

  • Magnetic Back Pouch - 3 Mil matte laminate 8.5" x 11" 10 Pack
    Magnetic Back Pouch - 3 Mil matte laminate 8.5" x 11" 10 PackOur new Magnet Pouch is a unique way for you to make your very own personal custom laminated signs and picture magnets. Matte laminate over a quality magnet will create a custom sign or picture that will stick to any metal surface. Simply place your printed paper or a photograph between the layers of the Magnet Back Pouch. Insert the Magnet Back Pouch into the provided carrier & run it through a heated pouch laminator. Be sure to run the Magnet Back Pouches sealed edge as the leading edge into the machine.

  • Finish: matte
  • Size: 8.5" x 11"
  • Thickness film: 3 mil low melt
  • Thickness magnet: 12 mil
  • Qty: 10 per package

    How To Use Magnetic Laminating Pouches:

  • Preheat your pouch laminator to high, somewhere between 230 degrees and 250 degrees f (110 degrees and 120 degrees c). Set the speed to slow/medium. Because there are so many different laminators in the marketplace, you may need to test several different settings to determine what offers the best results for you.
  • Run the sealed edge of the Magnet Pouch first into the rollers of your pouch laminator.
  • If your laminator requires it, be sure to use a pouch carrier.
  • To insure flat magnets, remove the magnet from the carrier immediately after it exits the pouch laminator. Place the magnet on a flat surface for cooling.
  • When printing standard magnets, card stock (8pt to 14pt) is recommended. Thicker stock may require multiple passes through the laminator.

  • Martin Yale CR828 Semi-Automatic Paper Creaser
    Martin Yale CR828 Semi-Automatic Paper CreaserThe CR828 Semi-Automatic Paper Creasers offer a superior out come for use with a wide-range of paper stocks. The semi-electric table top design creates the ideal solution for any size creasing project. The CR828 produce a wide channel, almost 1/16" of an inch thick crease, creating a hinge effect that distributes the stress of bending the paper fiber over a wider line. Creasing prevents tearing and cracking in toner-based digital printouts, providing a clean professional look, and making it easier for folding devices to fold with accuracy.

    Features of the CR828 Paper Creasers

  • Large working surface area, six stable feet to hold the machine firmly in place on any flat surface
  • Hard-anodized aluminum paper guides/paper stops
  • Durable steel construction
  • Easy set-up for single or double fold
  • Maximum Paper Weight: 16 points (130 cover)
  • Accurately crease a panel up to 14" in width, 18.2" long
  • Quick and easy set up, remove from package, install paper stops, plug in foot operation pedal, plug into outlet and you are ready.
  • 3 button control panel, crease, foot pedal On/Off, Reverse test/dejam
  • Foot Pedal ~ (default is ON, can be turned Off)
  • Automatic Jam detection
  • Use foot pedal or Crease button, two options for completing projects!
  • Weight 33.5 lbs
  • USA manufactured

    Sign in as member and receive free shipping in the contiguous US !


  • Spirit Masters Classic Thermal Tattoo Transfer Paper 100/box
    Spirit Masters Classic Thermal Tattoo Transfer Paper 100/boxReproFX Spirit Thermal Tattoo Transfer Papers are made for the professional artist. From our high visibility purple dyes to our ripstop stencil sheets, we use only the highest quality materials. Every time we manufacture, we test to ensure that the finished product meets our standard for excellence; if it doesn't, we don't sell it. And we manufacture everything here in the United States, just like we have since 1948.

  • This Spirit Thermal Transfer paper is perfect for transferring tattoo stencils.

    Thermal Spirit masters can also be used with all one-step thermal (infrared) spirit duplicating machines. In seconds, you can image these masters from any original that is suitable for thermal imaging.

  • Compatible with all thermal printers
  • Consistant, high quality images
  • Skin safe & shelf-stable

  • 8 1/2" x 11"
  • 100/box
  • Sold by the box

  •