fb
Member Login
 
Specialty Laminating Pouches

Permanently protect business cards, ID tags and documents against dust and dirt with one of our specialty pouches. We offer thermal heat activated or cold self-adhesive pouches with no laminator required.

The thickness labeled on the film is for just one side of the pouch. This means a 10 mil pouch consists of two 10 mil sheets (front and back) for a combined thickness of 20 mil. To get an idea on how thick 20 mil is, a credit card is 30 mil thick.

MagnetPouches are perfect for business cards, photos, teaching tools or any printed material. Magnet Pouch is the first product of its kind enabling you to make custom laminated magnets. Magnet pouches are produced through your pouch laminator! Just insert your material, put through a pouch laminator and trim to size if necessary...it's as easy as that. Magnet Pouches are available with a matte or gloss finish in 7 different sizes from business card up to 12" x 18" car magnets.

MAGNETIC CAR POUCHES *Documents that are exposed to moisture should be printed on Permanent Paper (synthetic) to avoid wicking if you are trimming the magnet pouches flush with the edges of your printed document. We offer a variety of sizes and weights of Permanent Paper.


• Sticky Back Pouches • Mount-A-Sign Pouches • Self-Laminating Cold Pouches • UV Pouches • Magnet Back Pouches

Magnetic Back Pouch - 3 Mil matte 8" x 10" 10 per pack

Magnetic Back Pouch - 3 Mil matte 8" x 10" 10 per pack
Product #MP810M
Price: US $74.11
Price: US $36.18
Qty 

Create your own custom magnets quickly and easily with our new, exclusive magnet pouches! Simply insert your printed image into the pouch, then pass it through a photo pouch laminator to adhere. These magnet pouches make refrigerator magnets and car door magnets easy to create in a small workspace!

  • Run the sealed edge of the Magnet Pouch first into the rollers of your pouch laminator.
  • If your laminator requires it, be sure to use a pouch carrier.
  • To insure flat magnets, remove the magnet from the carrier immediately after it exits the pouch laminator. Place the magnet on a flat surface for cooling.
  • When printing standard magnets, card stock (8pt to 14pt) is recommended. Thicker stock or a laminator with only 4 rollers and not 6, may require multiple passes through the laminator.
  • Finish: matte
  • Size: 8" x 10"
  • Thickness film: 3 mil low melt
  • Thickness magnet: 12 mil
  • Qty: 10 per package