Member Login
Specialty Laminating Pouches

Permanently protect business cards, ID tags and documents against dust and dirt with one of our specialty pouches. We offer thermal heat activated or cold self-adhesive pouches with no laminator required.

The thickness labeled on the film is for just one side of the pouch. This means a 10 mil pouch consists of two 10 mil sheets (front and back) for a combined thickness of 20 mil. To get an idea on how thick 20 mil is, a credit card is 30 mil thick.

MagnetPouches are perfect for business cards, photos, teaching tools or any printed material. Magnet Pouch is the first product of its kind enabling you to make custom laminated magnets. Magnet pouches are produced through your pouch laminator! Just insert your material, put through a pouch laminator and trim to size if necessary...it's as easy as that. Magnet Pouches are available with a matte or gloss finish in 7 different sizes from business card up to 12" x 18" car magnets.

MAGNETIC CAR POUCHES *Documents that are exposed to moisture should be printed on Permanent Paper (synthetic) to avoid wicking if you are trimming the magnet pouches flush with the edges of your printed document. We offer a variety of sizes and weights of Permanent Paper.

• Sticky Back Pouches • Mount-A-Sign Pouches • Self-Laminating Cold Pouches • UV Pouches • Magnet Back Pouches

Magnetic Back Pouch - 3 Mil gloss laminate 11" x 14" 10 Pack

Magnetic Back Pouch - 3 Mil gloss laminate 11" x 14" 10 Pack
Product #MP1114G
Price: US $135.60
Price: US $65.60

Our new Magnet Back Pouch is a unique way for you to make your very own personal custom laminated signs and picture magnets. Gloss laminate over a quality magnet will create a custom sign or picture in a 11" X 14" size that will stick to any metal surface. Just run your pouch with the magnet back thru a pouch laminator and you can fill your office or home with pictures and signs to enjoy throughout the day.

  • Finish: gloss
  • Size: 11" x 14"
  • Considered a business card size
  • Thickness film: 3 mil low melt
  • Thickness magnet: 12 mil back
  • Qty: 10 per package

How To Use Magnetic Laminating Pouches:

  • Preheat your pouch laminator to high, somewhere between 230 and 250 degrees f (110/120 degrees c). Set the speed to slow/medium. Because there are so many different laminators in the marketplace, you may need to test several different settings to determine what offers the best results for you.
  • Run the sealed edge of the Magnet Pouch first into the rollers of your pouch laminator.
  • If your laminator requires it, be sure to use a pouch carrier.
  • To insure flat magnets, remove the magnet from the carrier immediately after it exits the pouch laminator. Place the magnet on a flat surface for cooling.
  • When printing standard magnets, card stock (8pt to 14pt) is recommended. Thicker stock may require multiple passes through the laminator.